Ethical Hacking News
Tesla has issued a recall affecting approximately 173 Cybertrucks due to concerns over their wheel studs. The issue, which affects vehicles with 18-inch steel wheels, could potentially cause drivers to lose control of their vehicles. Tesla will replace the affected parts at no cost to owners and has acknowledged that production of these units was discontinued due to limited demand.
Summary: A recall by Tesla has revealed an issue with the wheel studs in some Cybertrucks, affecting approximately 173 units produced between August 2025 and November 2026. The problem may cause drivers to lose control of their vehicles, leading to increased risk of a collision. Tesla will replace affected parts at no cost to owners and is working to rectify the issue.
Tesla has recalled approximately 173 Cybertrucks due to an issue with wheel studs that could cause drivers to lose control of their vehicles. The problem lies in the brake rotors, where the wheel stud holes can become strained due to rough road conditions and cornering, leading to cracks that might spread and cause the stud to separate from the wheel hub. The recall affects vehicles equipped with 18-inch steel wheels produced between August 28, 2025, and November 2025. Tesla will replace affected parts at no cost to owners, with notification letters set to be sent in June. The recall raises questions about Tesla's manufacturing process and quality control measures, particularly regarding the introduction of a cheaper rear-wheel-drive Cybertruck model. The incident highlights the importance of prioritizing customer safety and ensuring a robust inspection process during production.
Tesla, Inc., a company renowned for its innovative electric vehicles and cutting-edge technology, has been embroiled in a recent controversy surrounding one of its products - the Cybertruck. The recall, which affects approximately 173 units of the vehicle, reveals a concerning issue with the wheel studs that could potentially cause drivers to lose control of their vehicles.
According to reports filed with the U.S. National Highway Traffic Safety Administration (NHTSA), production of the affected vehicles began on August 28, 2025, and were equipped with 18-inch steel wheels during either the manufacturing process or as part of a service visit. The recall stems from an issue where the wheel stud holes in the brake rotors could become strained due to rough road conditions and cornering, leading to cracks that might spread and cause the stud to separate from the wheel hub.
The implications of this issue are significant, as it may affect vehicle controllability, thereby increasing the risk of a collision. Tesla has acknowledged this problem, stating that early signs of the issue could include vibrations or noises audible from inside the truck. The company will replace the front and rear brake rotors, hubs, and lug nuts at no cost to affected owners, with notification letters set to be sent out in June.
The recall provides a glimpse into the production process of Tesla's Cybertruck, highlighting issues that were not thoroughly addressed before the vehicle was put on the market. According to the NHTSA filing, production of the affected vehicles stopped in November 2025 due to limited demand for Cybertrucks equipped with 18-inch steel wheels. This has led some outlets to speculate about the sales performance of Tesla's cheaper rear-wheel-drive Cybertruck, which launched in April 2025 and was discontinued later that year.
The launch of this version was met with significant attention, as it started at around $70,000 and omitted several features found on more expensive Cybertrucks. It also came with either 18-inch or 20-inch wheels, a choice that was seen as an attempt to attract budget-conscious buyers. However, the recall suggests that Tesla may not have been entirely successful in this endeavor, as it appears they sold very few units of the affected vehicles before pulling them off the market.
This raises questions about Tesla's manufacturing process and quality control measures. While the company has consistently touted its ability to innovate and produce high-quality electric vehicles, the recent recall highlights the need for a more rigorous inspection process during production. The fact that several outlets have connected this issue with Tesla's cheaper rear-wheel-drive Cybertruck further underscores the importance of quality control in ensuring customer safety.
Furthermore, the recall sheds light on the company's decision-making process, particularly regarding its willingness to cut costs by introducing a less expensive version of its product. The choice to discontinue the 18-inch steel wheel setup was likely made due to limited demand, but this decision has significant implications for Tesla's reputation and customer trust.
In conclusion, the recent recall of Cybertrucks highlights the importance of quality control in the automotive industry. As Tesla continues to push the boundaries of innovation and technology, it is crucial that the company prioritizes ensuring the safety of its customers. The fact that several units were affected by this issue underscores the need for a more robust inspection process during production.
Related Information:
https://www.ethicalhackingnews.com/articles/Teslas-Troubled-Past-A-Recall-Reveals-the-Dark-Side-of-Cybertruck-Production-ehn.shtml
https://gizmodo.com/tesla-recalls-cybertrucks-over-concerns-their-wheels-could-come-off-2000756284
https://www.popsci.com/technology/cybertruck-wheel-recall/
Published: Fri May 8 12:26:56 2026 by llama3.2 3B Q4_K_M
